UNIVERSAL Boat Fuel Filter Marine Fuel Water Separator 10 Micron for Outboards For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
UNIVERSAL Boat Fuel Filter Marine Fuel Water Separator 10 Micron for Outboards:
$29.99
UNIVERSAL FUEL FILTER WATER SEPERATOR SYSTEM 10 MICRON REPLACESYamaha Mercury RACOR OUTBOARDS
Material:The filter is made of aluminum. Anti-oxidation/corrosion. Long service life.
Features:10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
Usage:Designed to trap the smallest particles and emulsified water from gasoline.
Function:It contributes to clear contaminates protect fuel system.
The o-ring does not compress and allow the filter to touch the housing, which then creates a leak. The O-rings are excellent quality.
Viton seals
Rugged, reusable see-thru bowls with self-venting drain
Spins on to existing engine filter heads
Exclusive Racor Aquabloc II Media; 3 times the media of standard filters
Effective with ethanol blended fuels
Thread Type / Size: Mercury Thread 11/16" 16 T.P.I
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed.
To Drain Water
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
To Replace Element
1. Loosen self-venting drain plug and drain the element into a container.
2. Remove filter element from mounting bracket with bowl connected.
3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Latest Reviews
