Headlights Assembly For 2013 - 2015 Honda Accord Sedan Black Housing Headlamps For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Headlights Assembly For 2013 - 2015 Honda Accord Sedan Black Housing Headlamps:
$139.99
Fitment:Fit For Honda Accord 2013-2015(Please make sure your vehicle models is exactly same as us before purchase.)Specification:Type: HeadlightMaterial: ABS Plastic Casing + PC Lens Housing Color: BlackLocation: Left and RightNote: Without light source, with DOTFeatures: Brand New in the Box - Fit and Quality Guaranteed.Brings a Different Appearance to your Vehicle.Lens: Our Polycarbonate Lens offer superior UV protection and a high impact resistance.Street Legal Reflector: Highly Reflective Amber Reflectors offer OEM compliance with DOT.Package Includes:1 Pair (LH & RH) HeadlightWEIZE ST205/75D15 Trailer Tires with Rim, 5 Lug 6PR, Load Range C, Set of 2- Fitment:
- Fit For Honda Accord 2013-2015
- (Please make sure your vehicle models is exactly same as us before Headlight
- Material: ABS Plastic Casing + PC Lens
- Housing Color: Black
- Location: Left and Right
- Note: Without light source, with DOT
- Brand New in the Box - Fit and Quality Guaranteed.
- Brings a Different Appearance to your Vehicle.
- Lens: Our Polycarbonate Lens offer superior UV protection and a high impact resistance.
- Street Legal Reflector: Highly Reflective Amber Reflectors offer OEM compliance with DOT.
- 1 Pair (LH & RH) Headlight
Please Note: Professional Installed will be highly recommended
HOW TO INSTALL:
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
HOW TO ADJUST:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair infront of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights andcounterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the lightbeam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustmentcorrect. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
Latest Reviews
