Lexus details RC F’s new 5.0L V8

Lexus released the details for the RC F’s new 5.0L naturally-aspirated V8, which strays against the trend of downsizing, something the latest BMW M3 and M4 are a victim of due to tightening fuel economy regulations.

But nonetheless, the V8 also does without forced induction to displace 4,969cc. It is more or less the same mill that debuted in the original IS F, though it’s been tweaked to serve up around 12 percent more power, thanks to a higher compression ratio and less friction The result is 471bhp and 390 lb-ft of torque.

Everything from the intake, throttle body, cylinder heads, fuel injection, pistons, connecting rods, crankshaft, and the valvetrain are all new. The valves and inlets are titanium, while the connecting rods are high-strength forged steel with beefier main-bearings. The result is also a slight bump in fuel economy as well.

The Lexus RC F is capable of going from 0-62 in just 4.5 seconds for a top soeed of 168 mph.

Check out the press release after the jump.

If any single element defines the new Lexus RC F as a thoroughbred performance machine, it is its new V8 engine. The most powerful V8 Lexus has ever produced for a road-going car, it benefits from detailed design and engineering to deliver an exhilarating experience, from the moment the driver presses the throttle.

It isn’t just about power, however. This is an engine that is smooth, responsive and, thanks to its ability to switch between different operating cycles according to conditions, highly efficient. Its qualities are perfectly matched by the latest development of Lexus’s eight-speed Sports Direct Shift transmission. 

The 4,969cc 32-valve unit has evolved from the engine featured in the previous IS F model, but comprehensive changes have taken performance and driveability to a higher level.

Maximum power is up by 12 per cent – 54bhp (40kW) – to 471bhp (351kW) and the rev limit has been increased from 6,800 to 7,300rpm. The influence of the V10 deployed in the LFA is evident in the instantaneous, palpable torque delivery as the driver increases pressure on the throttle pedal. The higher, 12.3:1 compression ratio boosts torque across the entire rev range, with maximum output rising to 530Nm, available from 4,800 to 5,600rpm.

Specific measures were taken in the engine’s design to raise engine rpm, including the use of titanium inlet and exhaust valves, new high-strength forged connecting rods and new main-bearing materials.

Most of the engine’s components are new, including intake, throttle body, cylinder heard, the D-4S injection system, pistons, connecting rod, crankshaft and VVT-i valve timing.

Maximum speed is electronically governed at 168mph; nought to 62mph can be dispatched in 4.5 seconds; and a 400m sprint from standstill takes 12.5 seconds. The raw performance data tells only part of the story, however. The RC F has been designed to deliver exception driver rewards in terms of grip, handling and involvement.

Uniquely for a Lexus performance engine, the V8 switches to the more fuel-efficient Atkinson cycle when operating at cruising speeds, reverting to the Otto cycle for higher performance driving.

It uses Lexus’s VVT-iE electric motor-driven intelligent variable valve timing, with a new intake camshaft profile to increase valve lift. The valve-timing technology has been redesigned to extend the range of inlet camshaft timing adjustment for the Atkinson cycle: the inlet valves are held open longer than usual to allow a reverse flow of intake air into the intake manifold. This reduces pumping losses and increases the engine’s thermal efficiency, thus improving fuel efficiency and helping the engine meet Euro6 emissions standards.

Performance also benefits from higher pressure D-4S dual-injection, a wider throttle diameter and better breathing, thanks to new cylinder heads with improved porting and a high-flow, high-tumble ratio.

The exhaust system features large-diameter front pipes, which minimise back pressure and ensure high power output. Making the merged areas of the pipes larger produces a clearer engine sound, while the design of the main silencer keeps noise down at low engine speed, with a dynamic increase at mid-to-high revs.

Creating excitement through sound is one of the cornerstones of Lexus’s F philosophy. To that end, the RC F has an Active Sound Control system which delivers enhanced exhaust, intake and mechanical sounds into the cabin.

The designers’ intention was to approach the kind of aural experience delivered by the LFA, which is renowned for its stirring intake and exhaust notes.

The system uses an ECU to monitor engine speed, throttle position and vehicle speed. It calculates the optimum sound for any given set of driving conditions and creates auxiliary sound to match through a speaker located beneath the instrument panel. This speaker is completely independent from the car’s audio system.

The auxiliary sound pitch changes in a linear progression in response to engine speed and the degree of throttle opening. Up to 3,000rpm, it produces a steady, low and deep tone; as revs increase, this transforms into a higher-pitched note that blends with the engine’s mechanical sounds to create a rising sensation that culminates in a free-soaring sound beyond 6,000rpm.

The RC F is available to order now, priced from £59,995. First customer deliveries will be in February.

Chris Chin

Chris Chin is the Editor-In-Chief of egmCarTech and is a regular contributor to Automobile Magazine.

admin has 4428 posts and counting.See all posts by admin