Geneva Preview: Lotus Exige 270E Tri-fuel runs on gas, bioethanol and methanol

Lotus Exige 270E Tri-fuel

Lotus Engineering, a division of Lotus, will unveil its latest creation at the 78th Geneva Motor Show next week. The new Lotus Exige 270E Tri-fuel is a study of Lotus” research for a transition from today”s standard fuels to the sustainable, synthetic fuels of the future.

Running on any mixture of gasoline, bioethanol and methanol, the Lotus Exige 270E Tri-fuel is powered by a 1.8 liter 2ZZ-GE VVTL-i engine with a supercharger and intercooler package from the Exige S. The car produces an output of 270hp with a peak torque of 184 lb-ft, an increase of 51hp and 25 lb-ft over the standard gasoline Exige S. 0-60 comes in at 3.88 seconds with a top speed of 158 mph.

Click through for more images and the press release.

Lotus Exige 270E Tri-fuel Gallery:

Lotus Exige 270E Tri-fuel Lotus Exige 270E Tri-fuel Lotus Exige 270E Tri-fuel 

Lotus Exige 270E Tri-fuel Lotus Exige 270E Tri-fuel 

Press Release:

Lotus Researches Cars Running On CO2 Exige 270E Tri-fuel is the next stage of Lotus Engineering”s long-term sustainable, synthetic alcohol research

Lotus Engineering, the world renowned automotive consultancy division of Lotus, unveils its latest development towards carbon neutral road transport at the 78th Geneva International Motor Show. The Lotus Exige 270E Tri-fuel is the most powerful road version yet of the Exige (0-60 mph / 96 kph in 3.88 seconds, a top speed of 158 mph (255 km/h), 270 hp (201 kW / 273 PS at 8000 rpm) and it runs on any mixture of gasoline, bioethanol and methanol. Emerging technologies will allow alcohol fuels such as methanol, already a proven internal combustion fuel, to be made synthetically from CO2 extracted from the atmosphere.

An alcohol-based fuel derived renewably from atmospheric CO2 would allow society to transfer relatively easily to sustainable, carbon-neutral internal combustion. Lotus Engineering is researching the use of sustainable synthetic alcohols as potential future fuels, with technology available from Lotus for introduction in four to five years. However, the supply infrastructure investment from governments and fuel companies could take 15 to 20 years.

The Exige 270E Tri-fuel is part of Lotus” research to understand the complex combustion process involved in running on mixtures of alcohol fuels and gasoline, which will be important for a successful transition from today”s fuels to the sustainable, synthetic fuels of the future.

This research is just one aspect of Lotus Engineering”s ground-breaking work on environmentally-friendly vehicles. It is involved with a number of electric vehicle projects, has successfully integrated hybrid technologies into vehicles such as its EVE demonstrator, and recently announced results on a collaboration with Continental Division Powertrain on the Low CO2 downsized three-cylinder engine. The research into sustainable alcohols is progressing at Lotus” Hethel headquarters in Norfolk, UK and involves input from the Royal Society of Chemistry”s Alternative Fuel Symposium Series, the Low Carbon Vehicles Innovation Platform, developed by the Technology Strategy Board and direct discussions with the University of Sheffield.

Methanol (CH3OH) can be produced synthetically from CO2 and hydrogen. Ultimately, emerging processes to recover atmospheric CO2 will provide the required carbon that can entirely balance the CO2 emissions at the tailpipe that result from the internal combustion of synthetic methanol. The result is that a car running on synthetic methanol, such as the Exige 270E Tri-fuel would be environmentally neutral.

As well as being green, the great benefit of synthetic methanol is that it would use similar engines and fuel systems to those in current cars; and synthetic methanol can be stored, transported and retailed in much the same way as today”s liquid fuels such as gasoline and diesel.

Synthetic methanol also possesses properties better suited to internal combustion than today”s liquid fuels, giving improved performance and thermal efficiencies. And it is ideal for pressure-charging (turbocharging and supercharging) already being introduced by manufacturers to downsize engines in a bid to improve fuel consumption.

Lotus Engineering”s Lotus Exige 270E Tri-fuel technology demonstrator illustrates how easy it is for synthetic methanol to be embraced over time as a future fuel for road transport. The Exige 270E Tri-fuel, with its supercharged 2ZZ-GE VVTL-i engine, could be the forefather of a new generation of conventionally driven cars that have the potential to be environmentally-neutral.

Mike Kimberley, Chief Executive Officer of Group Lotus plc, explains: “Lotus is a world-class leader in research into a variety of alternative fuels; each has its merits and challenges and some options could be more easily implemented than others. But while motorists want to be green, we do not want to change the culture of total freedom for the owners, who will have an extreme reluctance to spend more at the pump, or to sacrifice the performance of their cars.

Mike Kimberley continues, “At present, the motor industry is seeking a route to reduce CO2 emissions just at the tailpipe; this focus is far too narrow. A sustainable alcohol such as synthetic methanol has the potential to reduce the overall CO2 footprint of internal combustion vehicles towards zero. Produced through CO2 recovered from the atmosphere and given a tax incentive, it immediately becomes a green, cheap and more desirable fuel. For those compelling reasons motorists, legislators and car manufacturers must switch to a sustainable alcohol like synthetic methanol.”

Geraint Castleton-White, Head of Powertrain at Lotus Engineering explains: “For car companies and the motorist, the use of sustainable alcohols like synthetic methanol requires relatively few changes to the vehicle. It can also use the current fuel distribution infrastructure, which is a huge advantage for suppliers.

Geraint Castleton-White continues, “We believe that, technically, there are a small number of significant but by no means insurmountable hurdles to the adoption of synthetic methanol as the staple future fuel for internal combustion. We are some way into a number of extensive research projects but of course, we understand that further research needs to be undertaken to fully overcome potential challenges that may arise.”

David Bott, Director of Innovation Platforms within the Technology Strategy Board in the UK says: “The approach taken by Lotus Engineering is a good balance between the desire for the lowest carbon emissions and the practicality of car evolution. The drive for low carbon transport is a real imperative and its progress will require short, medium and long term solutions.”

Tony Ryan, ICI Professor of Physical Chemistry at the Department of Chemistry at The University of Sheffield says: “There is a great opportunity to develop methanol as a transport fuel in a mixed energy economy that embraces a wide range of primary energy sources, including nuclear, solar, and other renewable power sources. Combining atmospheric CO2 with hydrogen to form methanol provides a pathway to personal transport with low carbon emissions that uses the existing liquid-fuel infrastructure and Lotus Engineering offers world leadership in the development of engines to use these fuels of the future.”

Synthetic methanol ““ a green fuel?

Synthetic methanol”s green credentials arise from its potential to be completely CO2 neutral. The most likely future mass-production of the fuel is by using electrochemical techniques to combine oxygen, hydrogen and carbon:

Carbon could be sourced from carbon dioxide recovered from the atmosphere using either large scale extraction facilities or biomass.

Oxygen would be taken from the atmosphere already contained in the CO2 molecule.

Hydrogen would be acquired through the electrolysis of water; challenges remain in the electrical power required; in a green future, this could be supplied from renewable sources, an issue already being addressed by supporters of hydrogen as a fuel.

Synthetic methanol can also be supplemented by production from biomass sources where properly sustainable.

Methanol can be produced easily from a wide variety of feedstocks.

Please see Synthetic Methanol Cycle Diagrams attached

Synthetic methanol ““ How to make it?

Techniques for the production of synthetic methanol through the extraction of atmospheric CO2 are well developed and understood but are not being employed on an industrial scale. An early solution would be the co-location of a nuclear or hydroelectric powerplant with a conventional power station ““ the hydrogen generated by hydrolysis of water would be combined with CO2 from either fossil or biomass sources to make liquid methanol. In the future, large volumes of CO2 could be extracted directly from the atmosphere.

Synthetic methanol ““ easy to adopt?

As well as being green, another crucial advantage of synthetic methanol is that it can be introduced relatively simply. As the Exige 270E Tri-fuel demonstrates, only small changes to engines are required, such as:

Sensors to detect alcohol content

Modified software for engine management control driving alcohol/gasoline, flex fuel and fuel systems operations.

Fuel lines compatible with alcohol fuels

Higher flow rate fuel pump and injectors

Fuel tank material, compatible with alcohol In addition, as a liquid, which is miscible with gasoline, synthetic methanol can be transported; stored and sold to motorists exactly as today”s liquid fuels are, with only minor modifications.

Synthetic methanol ““ a performance fuel?

Synthetic methanol is better suited to spark-ignition combustion than today”s liquid fuels, delivering better performance and thermal efficiencies, due to its higher octane rating giving it better resistance to “˜knock”. As a result, it is a fuel that will benefit the motorists in terms of driving experience. For example, the Exige 270E Tri-fuel is quicker to 60mph from standstill and has a higher top speed when using 100% synthetic methanol fuel than with conventional gasoline. Synthetic methanol is also ideally suited to pressure-charging, a trend already well underway as car makers look to downsize engines to reduce fuel consumption.

Synthetic methanol -the way forward

Lotus Engineering regards sustainable alcohols as the third step in a process towards carbon neutral driving. The current E85 (85% ethanol and 15% gasoline) based movement represents the first stage in building momentum towards sustainable fuels. The valuable learning from the current bioethanol vehicles on the market means that synthetic methanol would easily be managed technically and within the existing transport, storage and distribution infrastructure. The steps towards a synthetic methanol economy for transportation fuels could be as follows:

1st Generation: there is a handful of current bioethanol models on sale around the world. These cars run on E85 bioethanol, which is produced from valuable arable crops (food). This is unsustainable in the short and medium term as global demand for fuel will outstrip the supply available from farmland to the detriment of food production, but is a necessary step in the evolution of the market. 2nd Generation: the next generation bioethanol fuels will be based on biomass waste, for example crop stubble, waste vegetable-based oils and any biodegradable waste matter. This is thought also to be unsustainable in the medium to long term as the required volume of biomass increases beyond that which can be supplied. 3rd Generation: sustainable alcohols such as synthetic methanol can be introduced due to its miscibility with ethanol and gasoline. This fuel can be produced from entirely sustainable, readily available inputs, with an environmentally neutral overall impact. 4th Generation: Direct Methanol Fuel Cells: over the longer term, sustainable alcohols in internal combustion will facilitate the soft introduction of direct methanol fuel cells as a long term sustainable future fuel. This will only be possible with pure methanol pumps on the forecourt which internal combustion engines can bring forward due to their ability to consume a mixture of fuels.

Lotus Engineering strongly believes governments, fuel suppliers and car manufacturers have a key role to play in the adoption of sustainable alcohols as a future green fuel.

If car manufacturers were incentivised to produce next generation models for introduction over the next 5 to 10 years as flex-fuel vehicles capable of running on any mix of gasoline and bioethanol, there would be no need for an unfeasible instant global changeover. Late software changes can permit the introduction of methanol and fortunately, E85 bioethanol and subsequently synthetic methanol can be introduced gradually to the marketplace, due to their miscibility.

Should fuel suppliers increase the industrial-scale production of synthetic methanol, it could be introduced to forecourts across the globe within 15-20 years and eventually become a global standard.

The Lotus Exige 270E Tri-fuel

The Lotus philosophy is all about performance through light weight. The Exige 270E Tri-fuel is built to the lightest specification possible without resorting to expensive and rare materials. The performance improvements of using synthetic alcohol have been made through increasing the power of the engine without increasing its weight and therefore the overall weight of the car.

The Engine

The heart of the Exige 270E Tri-fuel is a Roots-type supercharger (with a sealed-for-life internal mechanism meaning that it does not require the use of the engine”s oil) and air to air intercooler attached to the tried and tested 4-cylinder, 1.8 litre 2ZZ-GE VVTL-i engine. Using a development of the supercharger and intercooler package from the Exige S, the Exige 270E Tri-fuel has peak power of 270 hp (201 kW / 273 PS) at 8000 rpm, 184 lbft (260 Nm) of torque at 5500 rpm, up by 51 hp (38 kW, 52 PS) or 19% and 25 lbft 45 Nm or 14% over the standard gasoline Exige S. Maximum engine speed is 8000 rpm (8500 rpm transient for up to 2 seconds).

The low carbon number alcohol fuels methanol and ethanol give more power when burned in the engine than conventional gasoline (petrol) fuel. The performance benefits come largely from the high heats of vaporization of methanol and ethanol, which give strong charge-cooling effects, and the increased octane ratings. There are other secondary thermodynamic effects. Methanol’s higher heat of vaporization leads to a slightly higher performance relative to ethanol. All charge air ducting has been kept as short as possible with large diameter pipes making sure that the bends in these ducts are not too tight, to the benefit of throttle response and efficiency. The Roots-type Eaton M62 supercharger is turned by the crankshaft, and has an integral bypass valve for part load operation.

The 2ZZ VVTL-i engine has two cam profiles ““ a high speed cam and a low speed cam. The seamless switch point between these two cams is completely variable depending upon driving conditions and engine load. This gives the Lotus Exige 270E Tri-fuel a smooth and linear surge of power from idle speeds all the way to the maximum 8500rpm. An electronic drive-by-wire throttle ensures the quickest engine response possible whilst keeping the emissions as clean and as low as possible, to meet relevant legislative demands. Six fuel injectors have been fitted to increase fuel flow to the engine at normal and higher engine speeds and loads.

 

[tags]Cars, Car, Auto, Automobile, Vehicles, Technology, Auto News, News, Automotive, Lotus[/tags]