Gas Springs Lift Support With L-type Mounts Prop Strut Shocks Tool Box Top Lid For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Gas Springs Lift Support With L-type Mounts Prop Strut Shocks Tool Box Top Lid:
$21.99
Gas Springs Lift Support With L type Mounts Prop Strut Shocks Tool Box Top LidThis Gas Springs 2 Pieces is perfect for holding the door or lid in place so that it may be opened to a maximum angle of 90 degrees. With a lid weight of 18 to 35 pounds, it is appropriate for toy boxes or windows. The operating force is 22 LBS or 100 Newtons (Per Strut). It's likely that the installation may need some testing and adjusting. Just keep in mind that the springs' vertical power decreases the further horizontally they are mounted. A tiny amount of oil is present in every gas spring to lubricate the primary seal and rod. Because of this, it is fundamentally advised that you install the gas springs in your design at an angle that is no greater than 60 degrees from vertical. A high dampening effect can be attained on the final few millimeters of the stroke by using the oil in the gas spring. To prevent excessive loading on the fittings during usage, it is imperative to ensure that the end fittings are appropriately fitted in the housing and to the spring. Springs should be stored rod down to lubricate the seal if they are to be stored prior to use.
- Rod down installation for the Gas Springs
- Make sure the end fittings are aligned to prevent side load forces from being applied because of misalignment.
- Put in place tangible restraints to control the spring's excesses. Make sure that no excessive force is used to either overly compress or overly expand the spring.
- The end fittings of the gas spring should be completely screwed.
- Do not paint, chip, bend, dent, dent, or scratch the rod.
- Avoid puncturing or burning. IGS offers a disposal service for a reasonable price.
- Lubricate the gas spring sparingly.
- Limit your cycling to 15 times each minute.
- No matter what, never try to re-gas a spring. This operation is very dangerous.
- Avoid letting outside objects provide side loads to the gas spring or the end fittings.
- 100N/22 pounds of pressure (Per Strut)
- 15 inches from hole center to hole center
- 6 inches of rod travel
- 9-1/4 inches separate the ball mounts when compressed.
- Extended distance: 15 inches
- If you are unsure whether the item is suitable for your project or if the instructions and screws are not included, contact us before placing your order.
- The pressure in Gas Springs is HIGH. NOT TO BE OPENED. DO NOT manually compress it. AVOID going up to the hot surface.
Shipping: We are shipping our product from five different warehouses in the United States. We only ship to the lower 48 states and do not combine shipping or offer local pickup. We do NOT ship to PO Boxes or APO'S. We do NOT ship our products internationally.Return: We offer a 30 days return policy. Buyer pays for return shipping. Estimated refund timing - 3 to 5 hours after receiving and inspecting theGas Springs
Scroll down to see a similar product in the TONNOV store!
Latest Reviews
