For information about installation service
BMW X6 E71
Series
optimized
%
M50d
280 kw
311 kW
11%
381 hp
423 hp
11%
740 Nm
882 Nm
19%
1. Optimized performance
2. Basic Optimized
3. Optimized consumption
The performance data are maximum values can be achieved only in the setting of performance Optimized (max. Power) or consumption optimized (consumption reduction) can be achieved
Please tell us the desired setting with the order. This is individually adjustable and changeable.
For the function:
In our performance and consumption optimization, we focus on accessories. This has the consequence that absolutely no changes are made to the vehicle.
Taking advantage of given by the vehicle manufacturer tolerances, this optimization allows your engine a Performance increase of up to 33% and a torque increase of up to 28%.
Reliability and stability of your our performance improvement in the foreground.
To improve performance, the fact is exploited that all common rail Diesel operated with excess air. The injection quantity precisely increases without exceeding the saturation limit. Thus, the exhaust gas stays soot and in conjunction with Diesel particulate filters not shorten the regeneration intervals.
Our xf-ultimate module corresponds to the latest software and hardware generation. It handlet around the ARM Cortex III high-end processor with the following specifications:
Processor: ARM Cortex ™ III Size: 32bit
Map editing: 48m / sec
Plug: FCI Automotive
Housing: Glass fiber reinforced plastic, heat-resistant, waterproof
Measurements: 11,5 cm × 10,0 cm × 4,0 cm
From this innovative solution result several advantages:
Performance and security are not contradictoryIn any modern vehicle is a control device that controls and monitors all functions of the engine. In the classic OBD tuning of this control device is reprogrammed and thus loses its protective functions. At too high a power setting this can lead to engine damage.
In contrast, in our xf-ultimate module the original controller does not change. All protection functions are fully maintained. Thus, no damage can occur even with a high power setting, as this is detected and prevented in real time by the control unit.
You must contact our xf-ultimate module do not worry about your car.
Another point is the fuel consumption with built-in xf-ultimate module, Although it seems logical at first glance, that more services are the result of more consumption, in practice, the opposite is true. Same procedure provided!
The explanation is very simple: Torque. In addition to the horsepower, our xf-ultimate module also a considerable effect on the torque of your vehicle. By the increased torque of the motor can generate more power at low speeds. So you can, or even highly shift the automatic transmission in your vehicle earlier and drive at low speeds in a high gear.
The result: The combination of improved efficiency and low speeds can be the Reduce consumption by up to 15%. Thus, this performance increase quickly pays for itself.
Same procedure provided!
Your savings in 15% reduction in consumption
and a price of 1,40 euros per liter of Diesel
20.000 km pa
40.000 km pa
60.000 km pa
6 liters / 100 km
252 .- €
504 .- €
756 .- €
7 liters / 100 km
294 .- €
588 .- €
882 .- €
8 liters / 100 km
336 .- €
672 .- €
100 € 8.-
9 liters / 100 km
378 .- €
756 .- €
1134 .- €
10 liters / 100 km
420 .- €
840 .- €
1260 .- €
Board of the xf-ultimate module
Specially made looms in OEM quality with original connectors enable even beginners to be installed in no time. A traceless rear armor in the original condition at any time. Before visiting the workshop, the xf-ultimate module removed and installed after the workshop visit again. With a few easy steps, entirely without problems.
For information about installation service
Cable sets in OEM quality
A guarantee on the performance and fuel consumption can not are made of any kind does not depend on many factors to be influenced.
These can include:
All xf-ultimate modules are subject to certain test methods which are carried out at regular intervals by the manufacturer.
Among the most important tests include:
Temperature resistancexf-ultimate modules may be subject to rapid temperature changes while driving. Their proper functioning in continuous operation is between - 20 ° C and + 135 ° C tests prove: Even hard knocks (up to 500 / minute) degrade the performance of xf-ultimate module in any way.
Winter performanceSalt accesses any electronics sharply. It can permanently destroy this even. All current xf-ultimate modules road salt are safe; Electronics damage exclude it. In the test, the manufacturer, the modules sprayed ten days around the clock with aggressive salt. Only after passing the test is a module-charge for delivery.
Scope of supply:
1x xf-ultimate module
1x cable set with mounting hardware in OEM
1x Detailed installation instructions as a PDF document
Please tell us following information at checkout with:
We are pleased to offer an installation service in our service center in Marktoberdorf.
For information about installation service
Schedules are here:
Please use messaging system or +49 0160 756 0995
Please read before buying our
"MI Page"