This item has been shown 1112 times.
CARBON CLEAN MACHINE L8D 5000 WATT TOUCH LCD SCREEN
THE DEVICE PROVIDES 1200 LITER HHO GAS ON SALE WITH 5KW POWER.
WHAT IS CARBON CLEAN MACHINE?
With carbon clean; The ignition system, cylinder, valves and carbon (soot) in your vehicle are cleaned with sticky and harmful deposits and your engine gains its first day performance.
WHAT PROBLEMS DO CARBON ACCUMULATION CREATE IN VEHICLES?
* Cylinder compression drops.
* Decrease in engine power.
* Excess fuel consumption.
* Bad idle.
* Decreased ability to accelerate.
* Hard working in cold weather.
* Engine shaking works.
* Ignition system, engine, valve and piston surfaces and exhaust system are cleaned.
* Fuel savings of up to 15% as a result of cleaning in heavily soiled engines are on average 3-5%.
* Engine performance increases. In diesel engines, the increase in power is generally 10% and some measurements 30% is normal. Initial start-up difficulty seen before the cleaning process in gasoline engines,
Misfire, low speed hard work and similar complaints are eliminated.
* The reduction of harmful exhaust emissions has been detected at values reaching over 40% in gasoline engines and 75% in diesel engines.
* 30,000 km. The vehicles are started to be applied.
* Every 10,000 km in gasoline vehicles. also repeats.
* Every 15,000 km in diesel vehicles. also repeats.
Hydrogen gas is given to the vehicle through the air filter and the vehicle is run at idle for 45 minutes. It is operated at 3000 - 5000 rpm by pressing the gas for 10 seconds every 5 minutes.
CARBON CLEAN ‘FULL POWER IN ECONOMY ENGINE IN FUEL‘
- ELECTRONIC GAS OUTLET ADJUSTMENT FOR VEHICLES BETWEEN 100-15,000 CC-7 inch Touch LCD Screen
- Our device has a complete microchip digital control system produced with the latest technology.
-Gas production is adjusted automatically according to engine volume up to 1200 liters per hour.
It can be used in all vehicles up to -15.000 cc.
- 10kw 220 volt DC power supply
- Constant current Digital power adjustment system
- Digital control DSP technology for the safety and reliability of the system
- Vehicle operation is detected automatically. The machine does not start producing gas before the engine starts. When the engine stops, the machine stops automatic gas production.
- There is an option to disable the engine detection system.
- Vehicle engine volume selection from touch screen
- Cleaning time selection on the screen 0-9999 min, remaining time display
- Machine total working time display
- An alarm is given when the machine maintenance time comes.
- Over pressure protection system
- The water level can be monitored on the screen. When it drops below the Minimum level, the machine shuts down and an alarm is given.
- Gas production amount is displayed on the screen.
- It is suitable for 24/7 use with its special radiator cooling system.
- Electrolysis water is protected against overheating.
- Electronic system over-heat protection
- Alarm function in case of power circuit failure
- Low chemical alarm function
- Overcurrent alarm function
- Double bubler Hydrogen gas treatment unit.
- Oven painted steel case
- front and rear wheels can rotate 360 degrees with lock system
- Fully enclosed sealed, boltless cell. It never leaks. guaranteed not to leak for life.
- Water storage capacity 10 liters
- Dimensions: h80x65x40cm
- Weight: 50kg
- Cell operating voltage 220 volts
- Working current: 0-22 amps
- Watt: 5000
- Gas production capacity: 16.6 liters
- Electric cable 5 meters
Gas hose 5 meters
-Electrolysis chemical: 1kg
ASK THE STOCK STATUS. IF NO IN STOCK AVERAGE DELIVERY TIME IS 15 BUSINESS DAYS.