5.0L COYOTE ALUMINATOR NA Crate Engine ALTERNATOR KIT CONTROL PACK M-6007-A50NAA For Sale

5.0L COYOTE ALUMINATOR NA Crate Engine ALTERNATOR KIT CONTROL PACK M-6007-A50NAA


This item has been shown 10731 times.

Buy Now

5.0L COYOTE ALUMINATOR NA Crate Engine ALTERNATOR KIT CONTROL PACK M-6007-A50NAA:
$12,393



5.0L COYOTE ALUMINATOR NA Crate Engine ALTERNATOR KIT CONTROLS PACK M-6007-A50NAA

Hi and thank you for taking the time to stop by our store Description 5.0L COYOTE ALUMINATOR NA CRATE ENGINE M-6007-A50NAA

Ford Performance has taken the Mustang GT 5.0L Coyote engine and created another in its series of "Aluminator" crate engines built to deliver higher performance. The 5.0 Aluminator NA is built with connecting rods and pistons designed specifically for high performance applications. Mahle®11.0:1 compression ratio forged pistons are hard anodizedand featureGrafal® low friction coating. The connecting rods are premium Manley ® H-beam with ARP® 2000 bolts and fitted with BOSS 302 high performance bearings. The 5.0L Aluminator NA is a direct bolt in for 2015-2016 Mustang GT. It can be used in street rod or resto-mod builds using Ford Racing's 5.0L engine controls pack. Part No: M-6017-504V.

  • Fits 2015 Mustang GT
  • 5.0L (302 cubic inches)
  • 11.0:1 compression ratio (nominal)
  • Mahle® Hard Anodizedforged pistons with Grafal® low friction coating
  • Manley® H-beam connecting rods with ARP® 2000 bolts
  • BOSS 302 connecting rod bearings
  • Forged steel crankshaft
  • Uses production 2015 Mustang GT aluminum block
  • Large rear sump oil pan with 8 quart capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
  • Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner aluminum heads with roller-finger followers reduce friction.
  • Boss 302 Valve Springs, M-6513-M50BR
  • Mustang GT production camshafts
    • Intake: 13mm lift 260 degrees duration
    • Exhaust: 13mm lift 263 degrees duration
  • Ford Racing engine cover kit M-9680-M50A
  • Includes manual transmission engine injector harness
  • Front cover is modified for Ford Racing Supercharger Kits
  • For applications not using aFord Racing Supercharger Kit, stock timing cover must be installed.
  • Includes colder heat range zero (0) spark plugs, M-12405-M50
  • Includes Ford Racing oil filter, part no: M-6731-FL820
  • Includes billet steel gerotor oil pump M-6600-50CJ
  • Vehicle harness and PCM not included. Use Ford Racing wiring, PCM and installation kit M-6017-504V designed for street rod/project car installation.
  • Does not include alternator, for alternator kit mount bosses and bell housing mount pattern common to 4.6L modular engines
  • Does not include exhaust manifolds

MUSTANG BOSS 302 ALTERNATOR KIT M-8600-M50BALT

This kit includes special high performance components as used on the production 2012-2013 Mustang BOSS 302 and is designed to operate at higher RPMs.

This kit fits Mustang 5.0L Coyote engine and features:

  • High-performance BOSS Alternator with 1-way clutchto prevent belt hop-off during upshifts
  • Higher tension belt tensioner
  • Larger pulley to slow the armature speed, reduce drag and reduce parasitic hp loss
  • Also fits M-6007-M50, M-6007-A50NA, M-6007-A50XSand M-6007-A50SCFord Racing crate engines
  • Kit includes OEM Mustang BOSS 302 alternator, tensioner, idler pulley, belt and mounting PACK - 2015-16 COYOTE 5.0L MANUAL TRANSMISSION M-6017-504V


    • Take the complexity and mystery out of wiring a late model 5.0L Coyote engine!
    • Designed to run 2015-16 5.0L 4V Coyote engines, M-6007-M50Aand M-6007-A50NAA5.0L 4V Ti-VCTcrate engines with manual transmission. M-6007-A50SCA and truck engines require modifications,
    • Includes PCM with Ford Performance calibration, Supercharged, M-6007-A50SCA and truck engines require custom calibration
    • Includes Electronic Throttle Control accelerator pedal eliminates throttle cable routing problems
    • Unique controls pack harness replaces stock body harness and is designed for street rod installation
    • Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis
    • Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors
    • PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system
    • For 2011-2014 engines use Control Pack M-6017-A504VA
    • NOTE: Installation of this PCM in a 2015-16 Mustang GT will result in a no-start condition.
    • NOTE: Not for us with a 2015-2016 F150 Engine.


    Payment PayPal is the preferred Payment method. Shipping FreeShipping andhanding anywhere in theLower-48 UnitedStates. Allitems are shipped within 24 hours after receiving payment (Monday thru Friday)Overnight shipping is a available Other

    If your unsure of your fitment please contact us with your VIN number so we can get you the right part the first time.

    This is a FordRacingPart designed, and built specifically for your Ford vehicle. Ford has made every effort to ensure that theirParts are top quality in terms of fit and ease to installation!

    Illinois residents must pay Sate of Illinois Sales Tax

    Be sure to add me to your favorites list!


    (Buy with confidence)


    6 Reasons to buy from us

    (1). 100% satisfaction guarantee

    (2). We sell GenuineOEM Ford parts

    (3). We don't sell knock offs

    (4).We are a Authorized Ford Racing and RoushDealer

    (5). We are a Authorized Ford Dealership

    (6). Services with a smile :-)

    Can't find what your looking for?Let us know so we can get it for you. You can reach usbyclicking on the bottom

    Thank you for your time!!!!!



    TabCutouts Template © Shipscript


    Buy Now

Latest Reviews

Send us a Tip