4Pcs 1" 25mm 5x4.5 5x114.3 Wheel Spacers 14x1.5 Studs For Ford Mustang 2015-2021 For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4Pcs 1" 25mm 5x4.5 5x114.3 Wheel Spacers 14x1.5 Studs For Ford Mustang 2015-2021:
$40.79
tp_autoparts
4Pcs 1" 25mm 5x4.5 5x114.3 Wheel Spacers 14x1.5 Studs For Ford Mustang 2015-2021Specification:
Thickness 1 inch
Center Bore Size 70.5mm
Vehicle Bolt Pattern 5x4.5"" or 5x114.3mm
Wheel Bolt Pattern 5x4.5"" or 5x114.3mm
Thread Type />For Ford
For Ford Mustang 2015-2021
Frod Explorer 2020-2022
For Lincoln
For Lincoln Aviator 2020-2021
Package include:
4 Pcs Wheel Spacers Adapters
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way tocheck the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1).IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER!Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and For Flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Important Notes:
Please make sure that these are the correct application for your vehicle. And confirm the PCD parameters of wheel spacers are consistent with the item parameters.We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
Installation by a trained professional is highly recommended.
Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.
Some vehicles may require modifications to make this type of adapter work properly.
Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you may need to modify them by make no promise or guarantee that this item is compatible with your vehicle and/or wheels.
Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only.
The adapters must be installed correctly, Lug Nut Guys or the manufacturer cannot be held responsible for improper installation causing failure.
Please ask if you have any questions, we're here to help!
Item SpecificsInterchange Part Number 1"5x4.5/14x1.5/70.5mmType Forged Black Wheel Spacer/AdaptersPackage 4PCVehicle bolt pattern 5x4.5" or 5x114.3mmWheel bolt pattern 5x4.5" or 5x114.3mmThread pitch M14x1.5 / 14mm x 1.5 / 14x1.5Center Bore Size 70.5mmThickness 1inch /25mmWarranty 5 YearBrand KYXManufacturer Warranty 5 YearsSurface Finish CNC Machined Polished Aluminum Finish
Payment
nonereceive.
Delivery details5.Seriouslypromise:
Ford Mustang 2015-2021
Specification:
Thickness 1 inch
Center Bore Size 70.5mm
Vehicle Bolt Pattern 5x4.5"" or 5x114.3mm
Wheel Bolt Pattern 5x4.5"" or 5x114.3mm
Thread Type />For Ford
For Ford Mustang 2015-2021
Frod Explorer 2020-2022
For Lincoln
For Lincoln Aviator 2020-2021
Package include:
4 Pcs Wheel Spacers Adapters
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way tocheck the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1).IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER!Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and For Flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Important Notes:
Please make sure that these are the correct application for your vehicle. And confirm the PCD parameters of wheel spacers are consistent with the item parameters.We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
Installation by a trained professional is highly recommended.
Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.
Some vehicles may require modifications to make this type of adapter work properly.
Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you may need to modify them by make no promise or guarantee that this item is compatible with your vehicle and/or wheels.
Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only.
The adapters must be installed correctly, Lug Nut Guys or the manufacturer cannot be held responsible for improper installation causing failure.
Please ask if you have any questions, we're here to help!
Payment
nonereceive.
Delivery details5.Seriouslypromise:
Honda Accord Catalytic Converter 2.4L 2354CC L4 Direct-Fit 16299 USD 53.69 1Pcs 2.5" Universal Catalytic Converter High Flow Performance w/O2 Port 410250 USD 29.69 For Honda CRV CR-V 2.4L 2002 2003 2004 2005 2006 Direct fit Catalytic Converter USD 66.69 2Pcs 2.5" Universal Catalytic Converter High Flow with O2 Port EPA Approved USD 67.69 New List Item 2Pcs 2" 5x4.5 Wheel Spacers 1/2"x20 For Ford Mustang Ranger For Jeep Wrangler KJ XJ USD 43.69 (2) 1.5" 5x5.5 Wheel Spacers 1/2"x20 Fits For Dodge Ram 1500 For Ford Bronco E-150 F-150 USD 42.69 For 2006-2011 For Honda Civic 1.3L Hybrid Manifold Catalytic Converter 5H642421 USD 63.49 1Pcs 2" Inlet/Outlet Universal Catalytic Converter High Flow EPA Approved 53004 USD 37.49 Pair Front Complete Strut & Coil Spring For 2004-2013 For Mazda 3 2006-2010 For Mazda 5 USD 103.69
Latest Reviews
