When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- Wheel Spacers
Whether this item is suitable for my car?
Please check the following compatible models for this item:
2015-2018 - Ford - Mustang GT/V6/Ecoboost(Lug M14x1.5)
1994-2014 - Ford - Mustang (Lug 1/2"-20 UNF)
2006-2014 - Ford - Mustang Shelby GT500(Lug 1/2"-20 UNF)
1990-2010 - Ford - Explorer (Lug 1/2"-20 UNF)
2015-2016 - Ford - Maverick(Lug M12x1.5)
After paid, please send a message with your vehicle year, make and model to us, then we confirm wheel spacer size for you and ship.
Hub Centric Design--NO VIBRATION
As you can see in the cross-section diagram of a hubcentric wheel spacer above, the locating ring fits into the space on the wheel exactly as the hub's locating ring would.This means that the weight of the car is still resting on the hub rather than the wheel studs, meaning the vehicle is set up just like it came from the factory, meaning no vibrations from the wheels, and also protect the studs.
However, with a non-hubcentric wheel spacer, the weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. That doesn't mean you can't choose non-hubcentric wheel spacer, but just confirm the studs are in good quality.
BLOXSPORT team design different hub centric(Wheel-centric lip) Fordifferent car models. Making the car at high speed, speedcross-country more secure and stable. To ensure car no vibration orshaking. Please see different design of hub centric as below:
SAFETY--Forged Aluminum Alloy Material
5 years warranty -- Forged Aluminum 6061-T6
Forged material possesses a better performance, they can meet the demand in different kinds of the extreme environments (rally, cross-country, etc.) more than 5 years warranty. It is not an ordinary aluminum(casting material), it is even an aluminum alloy for aircraft manufacturing, so you can rest assured to use. BLOXSPORT used Real FORGED material, have been made laser materialnumber(Forged Aluminum Alloy 6061-T6 or 7075-T6) and brand logo onspacers. Refuse "Three-None".
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Forged parts had a 26% higher tensile strength than the cast parts. This means you can have stronger shackles at a lower part weight.
Forged parts have a 37% higher fatigue strength resulting in a factor of six longer fatigue life. This means that a forged shackle is going to last longer.
Bolts/Studs/Lug Nuts Bolt/Stud affects the safety performance directly, so they are very important accessories. The good product is always along with the test report and can bear series of test.
As the picture show you, the ordinary stud has not the flexibility and anti-fatigue performance is too bad, easily being snapped off after long-term use. BLOXSPORT bolts/studs have passed test, ISO3800, 1 million time anti-fatigue test(German standard),and our bolts/studs/lug nuts used Heat-Treatment working processes to improve their performance to make sure the safety during long-term use.
Sample of wheel studs 12.9 grade has been tested by SGS according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated by SGS. .
(Quality and Safety, Above all.)
CNC Machined
The wheel spacers were modern CNC machined, the surface was more smooth, increasing car driving more stable and more secure and no vibration.
Black color hard anodized is more beautiful and luxuious, anti-rust.
How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you need. If you not sure which thickness you can install for your car, please use the measuring device to measure from the inside of the straight edge to the inner fender lip as below showing.
Item Benefits:
- Remove gad by spacing wheel and tire out to fit with fender after handing
- Increased performance in wheel drive conditions, improved appearance.
- Improve brake caliper clearance, BLOXSPORT spacer adds more clearan between brake caliper and wheel.
- Add inner fender clearance, add clearance between tire/wheel and inner fender.
- Add clearance between suspension and tire/wheel.
Product effect:
- Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.
- To improve vehicle stability and improve handing and other functions.
- To ensure that the car is more flexible, smooth and safe.
- To be able to make the sability of the vehicle greatly ascend.
Packing with hard boxes and froth bag, all-round protection for products, you will get a better experience.
- Installation should only be performed by a trained professional.
- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
- Please take the necessary measurements to ensure proper fitment. we only guarentee that you will receive the spacers that is described, we do not guarentee any fitment onto any vehicle.
- Please insure that the bolt patterns and thread patterns of your vehicle match the specifications above. That will insure a smooth installation.
- If the studs are longer than the Adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your exsisting lugs if you choose not to purchase shorter studs.
- If you have any questions reguarding how to properly measure your bolt pattern, please contact us via , and we can give you detailed instructions.
More and more customers believe in BLOXSPORT profession, so choose us.
Factory Shows
Safety guidelines(Minimum number of turns for wheel bolts/nuts)
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length How much standard torque force of different lug bolts or nuts is?
M12: 113NM(83.3Ft-tb); M14: 140NM(103.5Ft-tb); 1/2-20: 130NM(95.8Ft-tb)WARNING for 15mm/20mm wheel spacer(Lug Nuts Style)
Because 15mm/20mm wheel spacer is smaller than the length of the standard studs. For proper installation, it is REQUIRED that the back of your wheels have small cavities in the mounting pad for our 15mm/20mm spacers. These cavities are needed so that the lug nuts and wheel studs can sit in this pocket. PAYMENTSHIPPINGRETURNSresponseABOUT USPAYMENT We only accept paypal. (Accept credit card payment through PayPal)Payment must be received within 5 days after sales ended. If you do not have Paypal account, please registered with(HTTPS://www.paypal.com). SHIPPING--We are not responsible for custom duty or import tax.
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.RETURNS14 days money back, buyer pays return shipping.
responseMore and more customers believe in BLOXSPORT's profession, so choose us.ABOUT USBLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).
FEATURED PRODUCT20 Pcs Porsche 911 Locking Titanium Lug Bolts Wheel Bolts Grade 5 6AL4V
2X 35mm 5 Lug Wheel Spacers 5x120 for BMW X5 E70 F15 (07- 17) Front and Rear
$102.55 2X 8mm + Bolts Forged Hub Centric Wheel Spacers for Mercedes W211 W212 W220 W221 $64.55 2X 10mm + Bolts Hubcentric 5x120 Wheel Spacers for BMW 3 Series E36 E46 E90 F30
$69.55 - About us
- Hot Products
- Store home
- Contact class="noe">Returns & Exchanges
Copyright © 2016 bloxsport2. All Rights Reserved.