09-11 Chevrolet GMC Truck 5.3L Magnuson Intercooled Supercharger Complete For Sale

09-11 Chevrolet GMC Truck 5.3L Magnuson Intercooled Supercharger Complete


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

09-11 Chevrolet GMC Truck 5.3L Magnuson Intercooled Supercharger Complete:
$7344.75



New Magnuson Supercharger Kit

Fits 2009 to 2011 GMC / Chevrolet Trucks Equipped with 5.3L Engines

Unleash the true potential of your V8 Chevy Colorado with Magnuson’s MP1900 TVS Supercharger Kit. Available for the 2009-2012 Chevrolet Colorado 5.3L V8, this bolt on supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson TVS1900 Hybrid Roots Style Supercharger delivers power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers don’t tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat.

Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system that has IATs that are typically only 20-40 degrees (Fahrenheit) over the ambient temperature.

Maximizing your efficiency during cruising is the job of the supercharger’s integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to “free-spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like drivability and fuel economy - giving you a package that delivers power without compromise.

Down to the smallest part, our MagnaCharger line of bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don’t lose track of parts in the middle of your install. All of the hardware needed for a full and complete install is also included so you won’t be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step Installation Manuals will walk you through the install process with exacting attention to detail.

Magnuson’s MP1900 TVS supercharger utilizes EATON’s latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series Superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson’s patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in our TS16949 certified facility – the highest ISO OEM quality certification standard in the market.

Compatibility

Features

  • TVS1900 Hybrid-roots supercharger.
  • Installs in one day.
  • 100% complete bolt-on system.
  • No hood modifications are required.
  • More power in a smaller package.
  • 180deg. rotation of the supercharger provides a straight airflow path for maximum power and efficiency.
  • Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph).
  • Delivers a proven increase in real world "under the curve" power.
  • High thermal efficiency.
  • 2.4 pressure ratio capability.
  • High helix four-lobe rotors with 160deg. of twist.
  • Redesigned inlet and outlet ports.
  • Improved air-handling characteristics.
  • Acoustically designed for noise and vibration reductions.
  • Utilizes all factory "push-lock" connectors

Included Components

  • 6th Generation MP1900 TVS Supercharger with integral bypass valve.
  • Patented cast-aluminum high-velocity-port intake manifold.
  • Liquid-to-Air Intercooler.
  • Extruded aluminum high flow fuel rails.
  • 8 high-flow fuel injectors.
  • Front and rear fuel crossovers.
  • Padded Box and UPS 2-Day shipping label for computer return.
  • Large front-mounted heat exchanger.
  • All necessary fittings, lines, belts, and hardware required.

Warranty

  • Standard 3-year/36,000 mile Warranty on the supercharger hardware.
  • Standard 1-year Limited Warranty on electronics.

Maintenance

  • Only requires an oil change every 80,000-120,000 miles.

Emissions Status

  • CARB EO# D-488-32

Tools Required

  • Metric wrench set
  • 1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
  • 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
  • Belt tensioner wrench
  • Phillips and flat-head screwdrivers
  • 1/2in. breaker bar
  • Fuel line quick disconnect tool (included in kit)
  • Small or angled 3/8in. drill
  • Drain pan
  • Hose cutters
  • Hose clamp pliers
  • Safety glasses
  • Torque angle meter
  • Hammer
  • Compressed air
  • Blow gun air tool
  • Metric Allen socket set 3/8in. drive
  • Shop vacuum cleaner
  • Blue Loctite
  • Right Angle drill for pinning crank pulley (when required)
  • Helpful Tool: Air or electric impact wrench

Install Time

  • 8-10 Hours

CARB Executive Order:

  • EO# D-488-19

Size and Weight

  • Number of Boxes: 2
  • Box 1 Size: 34"x20"x16"
  • Box 1 Weight: 85 lbs.
  • Box 2 Size: 27"x14"x18"
  • Box 2 Weight: 40 lbs.

For parts and accessories, click on the Link:

We have the lowest priced parts and accessories in America! We promise to save you massive $$$ on all your Chrysler, Dodge, Jeep, MOPAR, Cummins, Sprinter parts and accessory needs!

AtSteve White Motors, we choose thebest shipping methodfor your order(via Federal Express or United States Postal Services – and occasionally with UPS). Simply supply us with your full “physical” address.

Orderswill be sent out within 1-4 business days and may take up to 4-12 business days in transit. The “shipping” fee quoted in this sale is for the Contiguous 48 states (excludedare Alaska, Hawaii, and Puerto Rico).Tracking informationwill be sent to your email address.NOTE:Due to some email addresses, the tracking information may appear in the Spam mailbox. Please be sure to check your spam mailbox.

Alaska, Hawaii, and Puerto Rico Orders

If you are a resident of Alaska, Hawaii or Puerto Rico, you are not in the Contiguous 48 states. We only ship with Fed Ex or UPS to these states. The carriers require additional shipping in order to deliver to your location. A“physical” street address is required!Please note:P.O. Box addresses willnotbe accepted – no exceptions!

You can contact us via email or phone[phone removed by ]before placing your order. If we do not hear from you, our shipping department will send you an invoice and email to notify you of the additional funds.

Canada Orders

We ship orders to Canada via UPS because of the GST taxes and duties. UPS will usually charge additional fees to your package as a brokerage fee. These fees are out of our control. Please make sure you are willing to pay these feesbeforeplacing an order with us.

International Orders

Please be aware of your country’s customs fees, duties, taxes and/or brokerage fees. Also, check with your local government/customs agent to see if any of these fees apply. These fees arenotincluded in your order. It is your responsibility to pay any fees that your government may require.

Warranties

Mopar® parts and Magneti Marelli offered by Mopar® parts installed by an authorized Chrysler Group LLC dealership or studio are warranted against defects in workmanship or materials for24 months / unlimited milesfor both parts and labor. Mopar® parts sold wholesale to an automotive service facility and installed by a professional technician are warranted against defects in workmanship for 24 months / unlimited miles for parts and up to $150.00 in labor. Mopar® parts and Magneti Marellioffered by Mopar® parts sold over the counter for vehicle owner or do-it-yourself installation are warranted against defects in workmanship or materials for 24 months / unlimited miles for parts exchange only. Contact us for the full warranty information and list of exceptions.

IMPORTANT!Warranties are only valid in the U.S.A.

Returns

If for any reason you are not satisfied with your part(s);(i.e., quality, fit, incorrect item, etc.), you can return the part(s) within 10 days of receipt. Simply fill out theSteveWhiteMotors “RMA / Return Authorization Form” which will be included with your order and ship the part(s) back to us. The returned part(s) may be subjected to a 20% restocking fee.SWMdoes not issue credit on original shipping fees. Electrical parts are non-returnable/non-refundable. All parts must be returned in original packaging and in a resalable condition.

Damaged Package/Part(s) In Transit

The Carrier is responsible for any and all items damaged during shipping. If your package/part has been damaged, you will need to fill out a “claim report form” from that Carrier in order to be reimbursed. Do not return the package/part to Steve White Motors. We are not responsible for any shipping damages.


Buy Now

Latest Reviews

Send us a Tip