McLaren teases interior of its latest P1 supercar

McLaren revealed some details and pictures surrounding the interior of its much-anticipated P1 supercar—the car that has been destined to be the successor to the legendary F1 from a couple decades ago.

Judging by the pictures and of course, the seriousness of this automobile, the interior is clearly designed to be driver oriented—obviously something you need for a car that seeks to be the best driver’s car in the world and on the track.

Unlike the McLaren F1 that the P1 succeeds, the new P1 has two normal seats, instead of the McLaren F1’s original centered driving position with two puny passenger seats on the side. And they appear to sit very low in the car with a high rising dash to mimic a cockpit. Virtually everything as you’d expect, is made from carbon fiber to keep weight down. But despite the focus on weight, the McLaren P1 still comes with a full climate control system, satellite navigation, and a unique sound system.

All-in-all, McLaren sought to build the most functional, yet one of the most luxurious interiors built for a supercar and will certainly put up a good challenge to its competitors.

THE McLAREN P1™: THE INSIDE VIEW

‘Shrink wrapped’ design theme extends to the minimalist cabin
Extensive use of carbon fibre throughout the cabin maximises weight-saving
The cockpit ‘of a fighter jet’

The McLaren P1™ has a clear goal: to be the best driver’s car in the world on road and track. In order to achieve this, performance and handling are key, but to extract the best from the aerodynamic bodyshape and the groundbreaking technology beneath the carbon fibre exterior, the driver has to feel comfortable and in control. For this reason, the cabin of the McLaren P1™ is fully focused on the driver, and is clear from clutter and distraction as these first images show.

The interior of the McLaren P1™ offers the driver and passenger a cocooning, efficiently packaged, comfortable cabin. The interior feels like the cockpit of a fighter jet, complete with glass canopy overhead and, with a windscreen deeper than it is wide, visibility is optimised. This makes the car all the easier to plant on road and track.

Light weight – as with the rest of the car – is a priority, and switchgear is kept to a minimum, yet the McLaren P1™ retains luxury features such as full climate control, satellite navigation and a bespoke sound system, developed from the outset with Meridian.

McLaren is a pioneer in the use of carbon fibre, and it features extensively throughout the McLaren P1™, not least in the MonoCage chassis and the aerodynamically-shaped body panels, but also inside the two-seat cabin. It is the lightest possible material, while offering the strength desirable for safety and structural integrity, and is used for the dashboard, floor, headlining, doors, rockers and a single piece is shaped for the central control unit to further optimise weight. Attention to detail within the interior of the McLaren P1™ is such that, to further reduce weight, the top layer of resin has been removed, to leave the carbon non-lacquered for a more natural look…and saves a further 1.5kg.

The amount of trim covering within the cabin has been minimised, leaving as many parts as exposed as possible, and there is no interior sound deadening in order to optimise weight saving even further. Carpet is offered, as an option, but when chosen, it is fitted with a special lightweight backing.

The racing bucket seats use the minimum amount of foam, are encased in ultra-thin carbon fibre shells, and mounted on lightweight brackets and runners, contributing to an overall weight of just 10.5kg each. The seat backs are fixed to 28 degrees from the vertical, but can be set to 32 degrees to make them more suitable for racing as it will give more helmet head room. The height of the seat will be custom set to suit the driver and passenger, and can be subsequently adjusted in the workshop. Fixings for a six-point race harnesses are in place, in addition to inertia reel seat belts.

The steering wheel diameter is as technically precise as a McLaren racing driver’s wheel. This is because past McLaren world champions’ grips were modelled on a CAD system and scanned to produce an exact replica. The rim is finished in Alcantara, with carbon fibre inserts.

Further details of the McLaren P1™ will be released in the coming weeks, before the production-ready car makes its world debut at the Geneva Motor Show next month.

– By: Chris Chin


Gates T137 TIMING BELT picture
Gates T137 TIMING BELT
2007 BMW 650 LR SEAT BELT BUCKLE OEM 72119117199 picture
2007 BMW 650 LR SEAT BELT BUCKLE OEM 72119117199
2002 jeep grand cherokee rear dual seat belt buckle receiver 2002-2004 picture
2002 jeep grand cherokee rear dual seat belt buckle receiver 2002-2004
2007 BMW 650I LF SEAT BELT, TAN OEM 72119138265 | NEEDS CLEANING picture
2007 BMW 650I LF SEAT BELT, TAN OEM 72119138265 | NEEDS CLEANING
2006 Infiniti G35 Coupe Front Passenger Seat Belt Strap Holder Guide picture
2006 Infiniti G35 Coupe Front Passenger Seat Belt Strap Holder Guide